Announcement

Collapse

Announcement

Welcome to the NEW iPad Rehab Forum! Everyone is welcome to read posts and learn for free. If you'd like to post your own question on the forum, please click "register" above or go here: https://forum.ipadrehab.com/register to enroll as a paid subscriber for $29/mo for unlimited access to our forum support and private signature failure section.
See more
See less

Iphone 6 no boot

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Iphone 6 no boot

    Ok.
    I done something stupid, I remembered a trick to get iphone 5c that was stuck on error -1 Or had no imei number.
    I use to put the board in the freezer for 20 to 30 minutes,
    In 3 freezer bags to protect it from water.
    anyway..
    I put a iphone 6 in the freezer to confirm the bb_cpu was the problem.
    What'
    Even worst is I left it in there over night.
    I post this as a reminder not to do what I do, or did.

    anyway, the phone will not boot now.
    when I plug it into the dcps it jumps to over 1 amp.. that is just from a quick tap, not a hold to turn on.
    I know there is a short somewhere.
    anyone had this issue with dcps reading such high amp out put from just tapping the power button ?
    any advice or help is appriciated.
    thanks

  • #2
    Update !!!

    I found the problem. I had a short to ground on pp3vo_nand.
    C0634 next to the nand if
    took it off and problem solved.

    I would like to contribute to the dcps data sheet.
    problem was..
    just by tapping the power button the phone would suck about 1300 ma and not boot.
    solved. Check pp3vo_nand line for a shorted cap.

    Comment

    Working...
    X