Announcement

Collapse

Announcement

Welcome to the NEW iPad Rehab Forum! Everyone is welcome to read posts and learn for free. If you'd like to post your own question on the forum, please click "register" above or go here: http://forum.mendonipadrehab.com/register to enroll as a paid subscriber for $29/mo for unlimited access to our forum support and private signature failure section.
See more
See less

Genuine SAMSUNG Galaxy Express i8730

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • eDigitCom
    replied
    This is a small video showing how I went about solving this issue

    https://www.youtube.com/watch?v=gNOB...ature=youtu.be

    Leave a comment:


  • eDigitCom
    replied
    UPDATE

    SOLVED



    A short on the power button. I removing the power button and replacing it temporary with two insulation wires as the switch and the phone was able to power up and off again


    Customer data saved


    A very happy customer


    Thanks everyone for the input

    Leave a comment:


  • eDigitCom
    replied
    I have not had the time crea2k to remove the switch so for. I have checked it on the board in resistance mode and it has a complete short I expect when I remove it and test it again the short will still be there

    All the customer is interested in is his data so will remove one of the volume buttons which are the same has the power button and use that has the power button. If the phone powers up them that is all the custom wants so his date is recovered

    The power button is free. You can press it and it will return So I not think it not stuck in anyway where switch cleaner or some clearer would do the job.

    So this to me looks like a direct short between the contacts but I could be proven wrong
    Last edited by eDigitCom; 05-17-2018, 03:17 PM.

    Leave a comment:


  • crea2k
    replied
    When you remove the power button is the short gone ?. I'd have just used some switch cleaner on it

    Leave a comment:


  • eDigitCom
    replied
    I j just took out the logic board and tested the Power Switch with a meter and it is shorted I compared it to the two volume buttons which are exactly the same as the power button switch to make sure and they are OK

    I am now going to remove the power switch button and one of the volume buttons and put the volume button in the Power Switch location to see if this solves the issue

    It sounds logically when you think about it has it only starts to power up to the Samsung logo and off again when the battery is removed and replaced. It should only power up when you press the Power Button so the short on the switch closes the switch permanently

    Once I know if this solves the issue I will let you know has it may help someone else that comes across the same issue

    Leave a comment:


  • eDigitCom
    commented on 's reply
    I connected it to a DCP with the same result

  • eDigitCom
    replied
    I getting some feedback that it maybe a short on the power button itself I going to check this first

    Last edited by eDigitCom; 05-16-2018, 03:00 PM.

    Leave a comment:


  • Jessa_the_Professa
    replied
    This phone is a candidate for chip off data recovery which is very straightforward. When it comes to data recovery, I don't take any chances. This one I would outsource and have Mark take off the EMMC and read the data from the chip. http://www.ipadrehab.com

    Leave a comment:


  • crea2k
    replied
    Have you tried running it off a desktop power supply ?.

    Leave a comment:


  • eDigitCom
    replied
    Any ideas from anyone on this??

    Leave a comment:


  • eDigitCom
    replied
    Samsung Galaxy Express I8730

    Will only start to power up when the battery is removed and replaced again.

    Customer only interested in recovering his data from the phone

    Battery is a know good one.

    Does not charge normally.

    Will only charge now and again when the phone starts to power up.

    Phone will not start to power up if the charging cable is connected ???

    Only starts to power up has shown in the video

    would appreciate any logic ideas on how to retrieve the data or get the phone to power up


    Link To Video


    https://youtu.be/h3VJDWDWnT8

    Leave a comment:


  • Jessa_the_Professa
    replied
    May need data? As in will it boot without a CPU or flash memory? No. Will it boot without a SIM or SD card expandable storage? Yes

    Leave a comment:


  • eDigitCom
    started a topic Genuine SAMSUNG Galaxy Express i8730

    Genuine SAMSUNG Galaxy Express i8730

    Do you need the data on a Samsung phone for it to power up I connected an external DCP and it did not power up so thinking it may need the data to tell it what to do with the power up


    Thanks
    Last edited by eDigitCom; 05-09-2018, 05:56 PM.
Working...
X