iPhone XR not charging - Tristar tester passes

[TiptonRepair]

The picture is the IC U3300 soldered to the board which should be Tigris on the XR. The IC flipped over is the Tigris 2 I got from my last iPadRehab...

[TiptonRepair]

The IC according to ZXW shows U3300 and that IC is on my list of failure point because that is the connection between VBAT and VDD_MAIN. VBAT voltage...

[TiptonRepair]

Does anyone know where I can get this IC? Customer is wanting to get their phone back soon.

[TiptonRepair]

Should have wrote "The component I am replacing is much larger than what I just got in on this last order". The Tigris 2 that is currently...

[TiptonRepair]

[TiptonRepair]

I got in U3300, but it is much larger than what I got in from my last order. The package is labeled Tigris 2, but they are TI 92WQMXP where the XR U3300...

[TiptonRepair]

Well crap.... must have ordered the wrong part since Tristar 2 looks way different on the XR than what I got in I don't see the XR U3300 in the store...

[TiptonRepair]

Just ordered the parts from your store and will replace the Tristar 2 when it comes in. I am only getting 1.1V from VCC Main and I am hoping that is...

[TiptonRepair]

I suppose you are talking about U6300 or U3300?

[TiptonRepair]

Also... This customer threw his phone which is what cause the screen and back glass to break. Pretty sure something else is knocked loose....

[TiptonRepair]

Ok, so the iPhone 8 battery connector is the same as the XR so I powered up the device using the DCPS and it worked perfectly. Plugged in the charge...

[TiptonRepair]

I don't have the squid adapter for the XR that I know of unfortunately so I have to play by ear and diode mode. The old battery we had was a used one...

[TiptonRepair]

Apparently our test battery failed and using another one got it to boot, but it did not charge still. Going to have to get another charge port in I ...

[TiptonRepair]

Just got in a phone that has had the screen and back glass only replaced (Laser removal) about a week ago. The device was working fine when it left our...

[TiptonRepair]

Got it figured out. FL1103 was not a complete circuit through the component and I replaced it with another one and everything is working. Never seen...